Hydraulic Cable Puller Stringing Equipment TY180 Hydraulic Puller Cummins Engine
TY180 Hydraulic Puller
The machine allows for the tension stringing of 4-bundle conductor of 630mm2 and below in mountainous and hilly areas, and of 4-bundle conductor of 720mm2 and below in flat lands; besides, it can be used for traction stringing of OPGW or ADSS optical cable and 500kV traction stringing in various terrains, suitable for use at altitudes up to 1500 meters above sea level.
| Max pull | 190kN |
| Max continuous pull | 180kN |
| Speed at max pull | 2.5km/h |
| Max speed | 6km/h |
| Pull at max speed | 75kN |
| Bull-wheel diameter | 750mm |
| Groove number | 10 |
| Max rope diameter | 28mm |
| Max diameter of rope reel | 1400mm |
| Total weight | 6700kg |
| Overall dimension (length*width*height) | 5000x2300x2500mm |
Engine
Diesel: 325hp Euro III, 4-stroke cycle, turbo-charged
Cooling system: liquid
Electrical system: 24V
Main configuration
Engine: Cummins
hydraulic pump: German Rexroth
Main motor: German Rexroth
speed reducer: German Rexroth
Tail bracket hoisting motor: American Eton
Hydraulic meter: German
Operating handle: German Rexroth
Hydraulic Transmission
Closed hydraulic circuit for step less speed variation in both rotating directions. This machine is provided with a pull pro-setting system that maintains the pre-set pulling value (also when the speed is reduced to "0") by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
Additional Devices
Lighting system for the trailer
Hydraulic rope clamp for reel change
Swivel guide rope roller
Trailer for towing at max speed of 30 km/h
Extra shaft
Digital speed and meter counter (extra charge)
Configuration
Hydraulic dynamometer with set-point and automatic control of maximum pull
Hydraulic oil cooling system
Control instruments for hydraulic system and diesel engine
On board reel winder with automatic level wind, suitable for standard reel mod. 1100 and 1400
Hydraulic front stabilizer, Grounding connection point
Additional Devices
The chassis provided with Brake, back lights and mudguard, with a single point lift to allow lifting with a crane.
Cable and radio remote control fully replacing all controls at machine panel.
Remote diagnosis via GSM network with GPS modem, Synchronization system
Hydraulic system for drum stand control with flat face quick action couplings
Auxiliary Hydraulic system (700/1000 bar) for power pressing tool
Lockable toolbox, Holding fixture for hose kit, Grounding plate, Acoustic insulation
Biodegradable hydraulic oil, Allowable tension indictor, Overload tension alarm, First Aid Kit
Manufacturer's workshop maintenance manual, in English
Manufacturer's recommended tools.
Manufacturer's routine spares for five years' duty (filters, bulbs, etc.).
Product Tags:
|
|
Hydraulic Puller Cable Stringing Equipment TY180 190kN With Cummins Engine Images
|
